Kreg Owners' Community

Look for owner feed back on the Kreg router table, self squaring fence and lift. Look to purchase one as it has some very cool features. The lift looks to be will though out. But since all the local Kreg dealers just stock the Pocket Hole tools I can not touch and feel it or even just buy it. 

So anyone how has first hand knowledge of the Table, fence and or List would be greatly appreciated.

Views: 5225

Reply to This

Replies to This Discussion

My bad, I thought you had the table top model.

Below are some photos of my Kreg router table setup today, some six years later. I add some drawers and some dust collection. The one photos with the black tube, is inside the dust collection box. The white tube, that is cut into the black tube, provides suction pickup for the fence.  The collection extends down below the blue rails. 


This shows the main 4" vacuum line and the smaller suction line going up to the fence
This is a picture inside the dust collection box. the black tube is the 4" suction line from the cyclone. The white tube, that is cut into the black tube is the suction pick up for the fence
Bottom of dust collection box.


Looking inside the dust collection box. Router motor at top of photo.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Adaptive Cutting System/Saw Blade

I have had the ACS for about a year.  Was wondering if there any other blades, like a Diablo, that will fit the saw?Continue

Started by Randall H Gress in Beginners' Zone Feb 20.

AutoMaxx 6" clamp not working

I have been using the Automaxx 6" clamp for two plus years, and recently the clamp is impossible to close the handles to secure the work and my jig. I cannot close the handles no matter how much pressure I can exert. I open the clamp to max to reset…Continue

Tags: clamp, inch, 6, Automaxx

Started by Anthony M Calabrese in Other Kreg® Products Feb 12.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_