Kreg Owners' Community

Look for owner feed back on the Kreg router table, self squaring fence and lift. Look to purchase one as it has some very cool features. The lift looks to be will though out. But since all the local Kreg dealers just stock the Pocket Hole tools I can not touch and feel it or even just buy it. 

So anyone how has first hand knowledge of the Table, fence and or List would be greatly appreciated.

Views: 5418

Reply to This

Replies to This Discussion

My bad, I thought you had the table top model.

Below are some photos of my Kreg router table setup today, some six years later. I add some drawers and some dust collection. The one photos with the black tube, is inside the dust collection box. The white tube, that is cut into the black tube, provides suction pickup for the fence.  The collection extends down below the blue rails. 


This shows the main 4" vacuum line and the smaller suction line going up to the fence
This is a picture inside the dust collection box. the black tube is the 4" suction line from the cyclone. The white tube, that is cut into the black tube is the suction pick up for the fence
Bottom of dust collection box.


Looking inside the dust collection box. Router motor at top of photo.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

4" Dust Port for Kreg router table fence?

Finally installed a 4" dust collection system in my shop. I'd like to find a 4" collection port for my Kreg router table (PRS1045) fence. Anybody know where I can find such an animal or one that can be modified to fit?Thanks!Continue

Tags: port, collection, dust, fence, Router

Started by E M Hampton in Other Kreg® Products Dec 2.

Kreg Circular Saw Track Guide Question

Hi all....Has anyone have experience using a Kreg circular saw track guide system for ripping long boards??? The boards would be 5 to 6 inches wide by 6 feet, I have a Bosch 4100 portable table saw. But ripping boards that length with a 45% angle…Continue

Started by Ed Anderson in Other Kreg® Products Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_