Kreg Owners' Community

Look for owner feed back on the Kreg router table, self squaring fence and lift. Look to purchase one as it has some very cool features. The lift looks to be will though out. But since all the local Kreg dealers just stock the Pocket Hole tools I can not touch and feel it or even just buy it. 

So anyone how has first hand knowledge of the Table, fence and or List would be greatly appreciated.

Views: 5204

Reply to This

Replies to This Discussion

My bad, I thought you had the table top model.

Below are some photos of my Kreg router table setup today, some six years later. I add some drawers and some dust collection. The one photos with the black tube, is inside the dust collection box. The white tube, that is cut into the black tube, provides suction pickup for the fence.  The collection extends down below the blue rails. 


This shows the main 4" vacuum line and the smaller suction line going up to the fence
This is a picture inside the dust collection box. the black tube is the 4" suction line from the cyclone. The white tube, that is cut into the black tube is the suction pick up for the fence
Bottom of dust collection box.


Looking inside the dust collection box. Router motor at top of photo.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pocket Hole Drawer Slide Brackets?

Hello - I have a couple of workbenches in my 'shop' and am contemplating putting 2 or 3 pull out bins on the bottom shelves of both. I've not worked with drawer slides before and am looking to make it simple(r). Thinking of making 2 sets of pocket…Continue

Tags: hole, pocket, basket, slide, Drawer

Started by E M Hampton in General Woodworking Jan 10.

Kreg Jig 5 Clamp Busted 1 Reply

My clamp to hold boards to my kreg jig no longer works.  It won't move from it's spot and when I push the grey button on top, nothing happens.  are there replacement parts for this?Continue

Started by Tammy in Beginners' Zone. Last reply by John Browne Jan 3.

Product Reviews

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 2 Comments

Kreg Jig Dust Collection Attachment

1st impression when you hold this attachment in your hand:  "not much to it", Kreg sure is makin' $$ here.



Then I installed it.. perfect fit, leaves just enough room to adjust the setting screw on my K4.



Then the real test, hook…

Continue

Posted by Grampy Meyer on February 23, 2020 at 11:36am — 2 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_