Tags:
I know your still getting to together, but whats your thoughts on the fence and table so far? I'm looking at buying them also... Once I get the base built....
Greg, was that mistake due to the isntructions? I've been thinking about gettin the smaller model this Fall if possible. Not enough room in my shop for a full-size. How oes quality compare to the Kreg Jig?
Here is a photo of the huge Porter Cable 7518 Router bolted up to the Kreg Precision Router Table Lift. The 7518 is a very large and heavy router motor. One nice thing, about the 7518, is you can buy a "Motor Replacement" instead of the whole router. That saves you at least $50.
Greg, you may have answered my question in your post but let me make sure of that. I don't have room in my shop for the full size Kreg router table and will purchase the portable or table top model. Is it possible to add the better t-square style Kreg fence to the table top model down the road?
Not sure as I do not have a table top unit. I would assume it would take some DIY modifications as the table top unit has a smaller top.
Not sure as I do not have a table top unit. I would assume it would take some DIY modifications as the table top unit has a smaller top.
Tim Myers said:
Greg, you may have answered my question in your post but let me make sure of that. I don't have room in my shop for the full size Kreg router table and will purchase the portable or table top model. Is it possible to add the better t-square style Kreg fence to the table top model down the road?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone 9 hours ago.
I have a k5 jig. Had an issue and took it apart. Now the small ball that is inside the ratchet compartment is gone.Anyone know the size needed to replace it?Continue
Tags: ball
Started by David Watson in Kreg Jig® Operation Jul 23.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2023 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service