Kreg Owners' Community

For my first full sized project with my Kreg Jig I chose the Router Table from the Kreg DVD on Router Tables. The instructions were dead on and made the process a snap. I have changed the design slightly and may have added my own Bloopers but basically it's right from the plans. My table is made with MDF except for the top which will be melamine. Not quite done but getting there.

I will add more photos on my page as I move forward.

 

Views: 369

Reply to This

Replies to This Discussion

Keith: Nice Job!!! I think you picked out the right first project. Once you get the router mounted, up and running you will get alot of miles out of it. One thing about bloopers is that most woodworkers make them sooner or later and hopefully watch for them on the next project! My Table is way over due for a make over!! The more I see you guys with these fancy new tables, the more Im going to have to do something about it! T
As stated in a previous thread when questioned about if a band saw or table saw first,the answer being 100% table saw..well the second most important tool in any woodworkers shop has to be a good multi speed router and router table...between those two tools,I'd say 90% of all the work is done between them.As for the bloopers,Ive been a professional woodworker for about 7 years now..and I'd be a very rich man if I had a dollar for every blooper I've had.Very nice job on your router,clean lines and all around professional look.Your well on your way to many years of fun and incredible projects..

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

1 Parts

Parts

Videos

  • Add Videos
  • View All

Forum

Parts

The Clamp anchor screw broke on my mobile project center.  How can I acquire a replacement?Continue

Started by Jon J Howard in Beginners' Zone yesterday.

Rip-cut ACS plunge saw

Just got a rip-cut and installed my Bosch saw haven't used it yet but saw was a good fit. Got the original ripcut and didn't really like it had trouble cutting straight. New one has several improvements should make it work much better. especially…Continue

Started by William Burt Brown in General Woodworking Mar 17.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_