Kreg Owners' Community

Does Kreg Have a Micro Jig Mini like the mini for the big brother? I am attaching some arched spreaders  to tapered legs of a table. The spreaders are on the diagonal and are 7/8s of an inch going into 1 1/8 inch tapered legs.Sure wish they mede a little single black jig with a 5/16 drill bit as the blue one is just a tad to big, but  it might work.

Views: 188

Reply to This

Replies to This Discussion

Hi Robert,
Test piece seem to work ok. But its just a small piece og ley attached to a reject spreader I had. Got to figure out a way to clamp them too so they dont move when the screws bite. But that shouldnt be too hard.

Still, Id prefer to use a smaller drill bit in piece like this. So hey you guys at Kreg, when are you coming out with a micro mini?

Thanks for the tip Robert
Robert it went real smooth, but it is a good thing I save all my scraps till I am done because I needed the piece I cut the arched spreaders out of to give support so I could clamp the thing. It had the perfect matching curve and one flat side. So save everything till you're done.

I just finished the table. I could not have done it without the greg mini jig.

Yes! We need a Kreg Micro Poket Jig Mini.


It is needed for working on smaller stock, smaller projects.

Here, here! I totally agree. Come on Kreg, get with the program! Also, fix your spell check on here so it doesn't show "Kreg" as a typo.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Rip-cut ACS plunge saw

Just got a rip-cut and installed my Bosch saw haven't used it yet but saw was a good fit. Got the original ripcut and didn't really like it had trouble cutting straight. New one has several improvements should make it work much better. especially…Continue

Started by William Burt Brown in General Woodworking Mar 17.

Is the screw driver impact drill rater?

Is the screw driver impact drill rated?Continue

Started by Bob Naylor in Beginners' Zone Mar 10.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service