Kreg Owners' Community

I recently saw an advertisement for the Kreg Micro.

Has anyone used it?  My wife does home jewelry sales, and the company sells these very nice hardwood display carry  cases, but you can imagine they are very expensive and come in one type (similar to these).  I would like to try and build one more to her specs.  Was thinking that the micro would come in handy for smaller stock.  

Any reviews?

Thanks 
Shawn

Views: 118

Reply to This

Replies to This Discussion

I have it, it plugs right into the K3 master system I have. It's nice - smaller holes. But it's for smaller projects and i used 1 inch screws. I actually saw .75inch screws at the rockler store but did not buy them because i wasn't sure what they were for. The box of the micro didn't say anything about it. Anyhow, the .75inch screw is to edge join 1/2 to 1/2 materials.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_