Kreg Owners' Community

Hello, has anybody in Australia managed to get hold of the Kreg KWS1000 Mobile Project Centre? I have tried Amazon but the freight was more than the tool cost and the local distributor, Carba-Tec don't have it and are't interested in helping. I assume this might change when Amazon open in Australia but that won't be until 2018.

Thanks.

Lee.

Views: 884

Reply to This

Replies to This Discussion

Hi Brad,

      It was a 135 degree plain twist drill.  Not as good as a counter-bore but it allowed the rivnuts to be flush.

Roger 

I got it around October last year. Overall, a good buy, but I am really bummed about the fact it is VERY far from being flat, and not adjustable.

Did someone succeed to adjust the wings to actually be a flat 180 degrees, and no more than that?

Thanks!

I am loving my work centre. True, the top isn’t flat but I wouldn’t expect it to be. It folds after all. The self adjusting clamp that comes with it is a real timesaver for me. I have since bought the Kreg accu cut and the rip cut jig. I find the method of attaching the saw to these to be truly awfull so I have the saws permanently with 5mm screws. I guess I don’t expect things to be 100% every time because they never are no matter who the manufacturer is.

Edward, 

The table top is not designed to be a completely flat surface.  It is designed to be a working surface and not a flat surface to be measured against.  While clamping your work pieces the material will be flat against the table and will not cause issues with your joint. With this being said, the table should not dip more than 1/4" from the center of the track to the edge of the table.  If it is more than this please either contact us directly or the dealer you purchased it from.  

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Constructing an island benchtop

G'day,I am a new member to the forum, although I have had the pocket jointer for a number of years, I just didn't get around to joining you.Anyhow - my wife and I are in the process of downsizing [in fact we are currently building our 3rd "Last…Continue

Started by Peter Watkins in General Woodworking yesterday.

New to K5 and pocket holes, any video’s on the materials listed below?

I am using Danny Proulx book on shop workstations. I am deciding whether to use MDF or Melamine. He calls for MDF. However; I like the looks of the melamine.  I am a little leery of using pocket holes for it. One of the main reasons is I have no…Continue

Started by Michael Lusk in Beginners' Zone May 24.

Product Reviews

K5 Review

I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…

Continue

Posted by Gary roofner on April 5, 2019 at 10:02am

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm — 1 Comment

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_