Kreg Owners' Community

I have the Kreg Jig Jr., and followed the jig settings instructions in the user manual exactly as presented for 3/4" material. It did not work. The pocket holes were too far from the end of the board. I am excited about the possibilities of the Kreg Jig Jr., but how to I make them become a reality?  What may have gone wrong?

Views: 464

Reply to This

Replies to This Discussion

The holes do sit back from the end of the board a bit, but when you use the correct size screw it penetrates the board with the pocket holes and goes into the other one and makes a very strong joint. What screw size are you using?


Could you please take a picture of how you have the Kreg Jr set up?

I may be hung up on terminology, "end of the board?" or "edge of the board?" Pic would help.

Kreg junior is a little more technique sensitive than the Master kit as you need to set the little legs correctly and then bias and clamp the jig properly.

Well, I woke up this morning, called the Kreg support hotline, was walked through what I did last night, and it worked beautifully today. I still cannot figure out what I was doing, or did wrong (maybe all I needed was a good nights sleep). Many thanks for all the responses to this post.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Miter saw stand

     Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings?  I scrolled through the pics in the community and all I saw were using a DIY base cabinet.  I have an extra Kreg router…Continue

Tags: saw, Miter

Started by Bill Murphy in Other Kreg® Products Jun 6.

French cleats 101 advice please

Hi all I am kind of new to the forum. Though I have been a kreg owner for more years than I can recall. As a CSS  (Complete Set Syndrome) sufferer I have obvious;ly got one of everything kreg make ( in my price bracket). LOL.  after years of waiting…Continue

Tags: Unklejon, french, Cleats

Started by John Hoskison in General Woodworking May 27.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 5 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service