Kreg Owners' Community

OK guys, this is my first post and I need help. I have been asked by my wife to come up with a knitting ball yarn winder for her. I researched her request on-line and found a few to purchase but at a very expensive price. $100 to $250 !?!?!?

Her requirements are simple; It must be made of wood . . . That's my wife ! ! ! Love it! More time in my shop!

Anyway, does anyone out there have any info., drawings, etc. that might help me?

This one, below, is exactly what she wants BUT sells for over $100 & I think I can build on from scraps. . . 

Views: 6035

Reply to This

Replies to This Discussion

I've been thinking about this also fo my sister, b'day present. Great minds must think alike. Did see one on Youtube, much more complicated then this one.

 

I found this site that is along the same lines as what we are looking for.

"TacoMagic's Random Insanity" It looks like this guy is trying to build one from scratch and make the plans available for FREE ! ! ! !

I have been following him and make a few suggestions to help. He is receptive to this.

I just ordered the plans off the site you referenced earlier. I'll let you know when they arrive.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_