Sorry, I hit send before some additional info.
I built this corner cabinet using the Kreg jig for all my joinery. Best thing since peanut butter!!
this is just great, this is what I am going to build for my moms kitchen only it will have a lazy susan, the door will turn with lazy susan have looked high and low, for instructions on how to make the lazy susan out of galvanized pipe. Good job folks, this picture encourages me to go along with the project all I have to do is experiment before I put it together. How are you going to finish it and show pics of it on the wall.
Thanks Kathy, and Evelinda. I found the plans on Anawhite.com. Actually, my daughter did. Very good site with a bunch of free plans. I thought about going with the lazy-susan as well, but the wife and I decided that since this cabinet is for her pots, pans and baking pans, it would better be used without the lazy-susan. I built-in a place for her to stand on end, all her baking pans and cooking sheets. This would not have worked with the lazy-susan. Plus, I think you loose a lot of area with the lazy-susan.
Going to stain and poly the outside and just poly the inside. Will post pictures after I stain and poly. The whole kitchen redone, will take some time!! ;o)
Very Nice
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service