Kreg Owners' Community

I need some tips for cabinet doors. (how to put them together)

Views: 627

Reply to This

Replies to This Discussion

What kind of doors .Raised panel or what
Trying to build doors in the wilderness. Plain panel

Jens Jensen said:
What kind of doors .Raised panel or what
I am using a cedar faced ply for the panel and a cedar frame.

Joseph Haynes said:
Trying to build doors in the wilderness. Plain panel

Jens Jensen said:
What kind of doors .Raised panel or what
Well you could just run a rabbit around inside of frame (ugly) or dado the center of your frame and assemble that way.
What is a rabbit and a dado. Novice as to terminology

Jens Jensen said:
Well you could just run a rabbit around inside of frame (ugly) or dado the center of your frame and assemble that way.
This might be somewhat helpful.
http://www.associatedcontent.com/article/364507/building_frame_and_...

Try a few searches on YouTube as well... I know there are lots of helpful videos out there.
Bob sent you some great info on rabbits and dados Good advice there

Good luck

Joseph Haynes said:
What is a rabbit and a dado. Novice as to terminology

Jens Jensen said:
Well you could just run a rabbit around inside of frame (ugly) or dado the center of your frame and assemble that way.


for some reason the other site would not open for me so here is another one

Jens Jensen said:
Bob sent you some great info on rabbits and dados Good advice there

Good luck

Joseph Haynes said:
What is a rabbit and a dado. Novice as to terminology

Jens Jensen said:
Well you could just run a rabbit around inside of frame (ugly) or dado the center of your frame and assemble that way.
I dont think this is going to fly either Let me no
Doors are one thing I don't use the Kreg on. I use router bits designed for this with the router mounted in a table. Stile and rail
bits aren't cheep but are a good investment.
I Have the bits but how do I guide the top rail to cut the profile on the end,.
Joseph

Michael Veach said:
Doors are one thing I don't use the Kreg on. I use router bits designed for this with the router mounted in a table. Stile and rail
bits aren't cheep but are a good investment.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_