Keeping things square
Views: 395
Replies to This Discussion
-
Permalink Reply by Michael Coughlin on
-
are you gluing and screwing. If so, use clamps to bring back into square. When glue dries, remove clamps.
-
Permalink Reply by Ryan Zylstra on
-
Kreg Jigs are very reliant on mating material that have nice square cuts. Putting a nice fresh cut on the ends of boards is always a good idea. Many boards from home stores or lumberyards may look good on the ends but a few degrees of angle on the ends can definitely throw a box out of square. Also make sure your Miter saw is cutting a true 90 degrees from its fence. Good luck
-
Permalink Reply by Tim Donahoe on
-
Appreciate that feedback Ryan. I'll give it a try.
-
-
Thank you as well Michael. I will try to glue and clamp and see how that works.
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Videos
Forum
First time I really had a need for the ACS miter guide.
I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue
Tags: ACS
Started by Adam in General Woodworking May 6.
What thread and size screw to use 2 Replies
I am building a small trunk for a military friend to put some belongings in. I have made legs out of ash hardwood and will make the sides out of 1/2” or 3/4” Baltic birch plywood. The legs are 1.5” thick by 2” wide. So since I’m drilling pockets in…Continue
Started by Mike Bohannon in Beginners' Zone. Last reply by Jay Boutwell Apr 19.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2022 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
