K5 Repair

I have a k5 jig. Had an issue and took it apart.

Now the small ball that is inside the ratchet compartment is gone.

Anyone know the size needed to replace it?

Replies to This Discussion

Permalink Reply by Eariyya on February 27, 2024 at 4:45am

Sounds like you're in a bit of a fix with your K5 jig! Losing that small ball from the ratchet compartment can be quite a setback. To get the right replacement, you might want to check the manual or reach out to the manufacturer for the specific size you need. Alternatively, if you have a local hardware store nearby, they might be able to help you find the right one 1wins. Best of luck resolving the issue and getting your K5 jig back in action!

▶ Reply

▶ Reply to Discussion

RSS

Welcome to
Kreg Owners' Community

Sign Up
or Sign In

Or sign in with:

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.

Videos

Miter Saw Workbench

Added by Mike Criss

The Ottoman with Secret

Added by Alex DrMaster

How to Build a Shaker Fireplace Surround - Woodworking

Added by Philip Miller

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.