Kreg Owners' Community

I just got my K5, and it's really nice. However, I cannot find a nozzle to fit the vavuum port, and I can't locate an adapter to make it fit what is available. Woodcraft store just shrugged. Any solution to this?

Thanks,
Barbara Dyer

Views: 254

Reply to This

Replies to This Discussion

Theold extension tubes I had laying around from an old Shop Vac brand shop vac fits mine just right. I use a small shop vac and not the dust collector.

I found an adapter at Rockler.

Try Home Depot. Rigid makes some adapters. Search for "rigid vac adapters"

http://www.homedepot.com/s/rigid%2520vac%2520adapters?NCNI-5

PS---make accurate measurements of the port on your device---

take it with you to check the adaptors, to insure they'll fit.

I've seen some adaptors marker 1-1/2" and they measured 1-1/4" and

 visa versa.

Some of the workers at some of the stores tell you they're the same---

some don't know there's a different.

Akin to a 2x4, that measures 1-1/2 x 3-1/2".

BTW---if you have/find an adapter, that may be a little loose, 

you can simply make a fix by adding a wrap or two of masking tape, (blue or green), around the male end, to make a tigher fight.

You want to the fit to be "snug"---just so it doesn't vibrate loose, or easily come off.

Use a slight twisting motion to tighten/loosen.

 

This kit includes a 1" and 1-1/2" port adaptor.

The port on the Kreg is 1-1/4".

I use this adapter, on my shop vac to the Kreg ports.

http://www.rockler.com/shop-vac-dust-fitting-adapter-for-1-1-4-to-2...

I've also found adapters at vac supply stores.

Take your vac hose with you, when shopping, so as to get the correct match fit.


Robert Melrose said:

OK. Finally got a pic of my setup. I hope this helps.

That small shop vac is WAY more vac than you really need for the K5 port. I can feel the pull when I set the piece in place to be drilled.

[URL=http://s228.photobucket.com/user/BrightwoodTurnings/media/20170323_160629_zps5xb1metm.jpg.html][IMG]http://i228.photobucket.com/albums/ee217/BrightwoodTurnings/2017032...[/IMG][/URL]

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

What's On Your Wish List? 1 Reply

Started by KregRep in Community-Specific. Last reply by Brad Martin Nov 17.

attaching track saw to Kreg Rip-Cut 1 Reply

Started by A Kain in General Woodworking. Last reply by KregRep Nov 14.

Full size bed 2 Replies

Started by Bigchief in Beginners' Zone. Last reply by justin waldron Nov 11.

Router Table Cabinet 2 Replies

Started by Steve Mitchell in General Woodworking. Last reply by Steve Mitchell Nov 7.

PVC Mouldings 3 Replies

Started by douglas E. Cooper in General Woodworking. Last reply by Don Foley Nov 6.

Product Reviews

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

The Pocket Hole Joinery Book - Review

Posted by Daris R. on October 17, 2017 at 11:00pm

© 2017   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_