Kreg Owners' Community

I have a K3 and my nextdoor neighbor has the new K4 he really wants to get a clamping body for a K3.  Does anyone have a source for just a clamping body?

Views: 268

Reply to This

Replies to This Discussion

Have a look at Woodentoolcompany's utube channel.  There is a way to improve both k3 and k4 jigs that make them alot faster.  Look under k3 on a foot lever.  The video's show how to build a simple jig that enables user to open and close the clamp with your foot rather than by hand thus taking the step of setting the drill down everytime between holes.    Turns both kinds of jigs into super jigs!
There's one on eBay. Last bid $28 plus $15 shipping so far.

$13 to ship!

Dealing with large panels is a huge pain, and the $69 tag a little on the 'generous-to-Kreg' side, but geeze, another $13 on top of that is kinda irksome...

And when were they going to tell anyone? This is what the K4 should have been all along.

Scott

Owner of at least one of nearly every Kreg jig they offer, drawer installation included, along with the shelf pin jig, and more than my share of clamps too.



Gary roofner said:

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_