Kreg Owners' Community

I know most people on here are reasonably smart I've seen some of the stuff you made
and besides you bought a Kreg! With that being said alot of people are looking for plans
to build stuff well instead of that just type furniture in google and look at the furniture stores
for ideas I just about bet that 99.9% of us can figure out how to reproduce something we like
with a reasonable simularity besides making it the way you want makes it more personable.
anyway this was just MY 2CENTS WORTH!

Views: 89

Reply to This

Replies to This Discussion

My wife gave me a picture of a bathroom vanity to create so we could start to redo our bathroom. Also new head board for the bed and then the counter top for the bathroom had the be redone to add a vessal sink.
Then the church needed a new chair for the minster and again it was just a picture and what kind of wood and finish. I made the first chair and then it was two more to join the first on the alter...
As you can see I just get a picture or an idea for my projects.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_