Kreg Owners' Community

Hi,

I am working on building a home entertainment unit.  My main material is 3/4 and my backing is 1/2.  I am planning all of my joints Joining 3/4 to 1/2. On the jig I set for 3/4 then use screws for 1/2 correct?

Glenn

Views: 7904

Reply to This

Replies to This Discussion

Glenn, what you are doing is correct. You always want to set your jig for the thickness of material you are drilling into, which is 3/4" in this case. And then use screws for whatever thickness of material you are screwing into, which is 1/2" in this case. Since 1/2"-thick plywood is never quite 1/2"-thick, you may want to test it out on a piece of scrap plywood before you drive a screw into the material you are using for your project.
KregRep

Great thanks for clearing that up for me.

This is my first project using the Kreg Jig and I am really impressed.  When I am finished I will submit a photo.

Glenn

We are glad to be of help, Glenn. And we can't wait to see the finished project!
KregRep

For the 1/2" backing would you use a 1" screw through the 3/4 ply into the half? I'm making a similar unit

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_