Kreg Owners' Community

I have not used my k3 kreg jig yet but was wondering if someone can give me some pointers. Has anyone joined 2x pt lumber such as a 2x10 and a 2x6 to created a wide staircase stringer. I was thinking of using polyuerethane glue and alternating pocket joints front and back every 8 " for a total of 4ft.

Views: 234

Reply to This

Replies to This Discussion

I think Kreg's special deck jig might be just what you need.
So let me get this straight you want to make a stringer that is basically 2x16 lets say.. and you want to edge join the two boards with your Kreg jig......

I've never done this but I'm thinking it would work if you glued and screwed it... The Kreg joints are strong as hell.
No need for the deck jig if I understand you correctly...

So the question is why? :-)


Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


First time I really had a need for the ACS miter guide.

I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue

Tags: ACS

Started by Adam in General Woodworking May 6.

What thread and size screw to use 2 Replies

I am building a small trunk for a military friend to put some belongings in. I have made legs out of ash hardwood and will make the sides out of 1/2” or 3/4” Baltic birch plywood. The legs are 1.5” thick by 2” wide. So since I’m drilling pockets in…Continue

Started by Mike Bohannon in Beginners' Zone. Last reply by Jay Boutwell Apr 19.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service