Kreg Owners' Community

Kreg Jig® K5--The most advanced Kreg Jig® yet!

 

The Kreg Jig® K5 makes it easier than ever before to build it yourself and build it better.

 

$139.99

The all-new Kreg Jig® K5 incorporates the best features of every Kreg Jig® that came before with it with a batch of new upgrades that you’ve never seen before.

Those features start with an all-new clamping mechanism that has a front-mounted handle and adjusts to different workpiece thicknesses without tools or adjusting nuts. Adjusting for different thicknesses is accomplished, instead, by simply sliding the clamping mechanism into position, lifting the front-mounted handle, and then pushing it back down. This quickly and easily sets the spring-loaded clamp to hold tight without working loose over time. Resetting for a different thickness only requires repeating the same simple steps. Rubber padding on the clamp face prevents workpiece marring.

Adjusting the K5 is simplified further thanks to a quick-release Drill Guide Block, as well as a new setting block for the drill bit stop collar. In addition to the included standard 3-hole Drill Guide Block, the Kreg Jig® K5 is also fully compatible with the Kreg Micro Pocket™ Drill Guide and Kreg Jig® HD.

The K5 supports long or wide workpieces easily thanks to a pair of removable extension wings that double as storage compartments for drill and driver bits, Kreg screws and plugs, and other K5 accessories. Add in an adjustable workpiece stop, a swiveling dust-collection port, and hex-shank drill and driver bits, and it’s easy to see that the Kreg Jig® K5 truly is the most advanced Kreg Jig® yet.

When you purchase a Kreg Jig® K5 you also get access to SkillBuilder™ videos that teach you how to get the most out of the jig, and you’ll receive exclusive free downloadable project plans so you can start building with the K5 right away.

 

Kreg Jig® K5 Features at a glance:

  • Ratcheting tool-free clamping mechanism
  • Front-mounted handle
  • Quick-release Drill Guide Block
  • Extension wings with built-in storage
  • Swiveling dust-collection port
  • Adjustable workpiece stop
  • Accepts workpieces from 1/2" to 1-1/2" thick
  • Screw selection chart keeps this essential information close at hand
  • Drill bit setting block makes stop-collar setup simple
  • Compatible with Kreg Micro Pocket™ Drill Guide and Kreg Jig® HD
  • Includes sample pack of screws and plugs
  • SkillBuilder™ videos show how to set up and use
  • Includes exclusive FREE downloadable project plans

 

Check out the Kreg Jig® K5 HERE

Available September 1, 2013

$139.99

Views: 26630

Reply to This

Replies to This Discussion

I just bought the K5 and have used it for a few "practice" projects. Now that I will be starting my first "real" project I noticed what appears to be a "major" typo in the K5 manual. Specifically, there seems to be a typo in the "Kreg Jig Setting" column of the "Screw Selection / Kreg Jig Settings Chart" in the Settings section of the manual. The possible typo is in the 3/4" (19 mm) Material Thickness row of the chart. In that row, it states that Kreg Jig Setting should be "5/8" Mark". Shouldn't the setting be "3/4" Mark"? Looking at all the other rows, this appears to be the appropriate setting, given the arithmetic progression in the "Kreg Jig Setting" column of the chart. 

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_