Kreg Owners' Community

Welcome to the Kreg Owners' Community!
This thread is the best place to introduce yourself and let other Community members get to know you. Please include your name, where you're from, your experience building with wood, why you joined this Community, and any other interesting facts about yourself. Also, feel free to share links to your blog, personal website, etc.

Once you've introduced yourself, be sure to check out Helpful Tips for New Members.

We hope that you find great use and enjoyment from the Kreg Owners' Community!


Views: 73122

Reply to This

Replies to This Discussion

Hello all, just in the process of using my Kreg jig for the 1st time on a shoe rack.

Much needed, next up is a Buffet Table, but not sure wether to use MDF or Ply?

Looking forward to learning loads, making mistakes but enjoying myself.

Best wishes to everyone 


Hi, been a Kreg user since the beginning. Always had success with their jigs and will continue to use them.

Hi all,

My name is Russ from Rolling Meadows IL.  I'm recently retire and getting back into woodworking. I'm taking a class at a local High school. My project is a bookcase. I'll be using pocket holes to assemble the unit. I bought a K5 Master system for home projects. I'm looking forward to learning alot from this forum.

Hi Folks. 

I live in Springfield TN. just outside of Nashville. I bought a K5 master system, have not used it yet. Looking forward to it. I have a woodshop in my basement and enjoy woodworking when I can. Looking forward to being apart of the community here. 

Hi, my name is Chris. I live in east central Indiana. I am recently retired and am new to woodworking. Looking forward to learning from this group. I like working with Kreg pocket joinery and working with router. I recently completed my first major project, a vanity for my granddaughter. It is actually a conglomeration of techniques as I was learning on the fly. It is far from perfect but I have learned a lot, and it is onward and upward from here. I’ll post a photo when I get a chance. 

Simple design although it matches the TV/Grow house I built and I did them both with Kreg Tool Pocket joints

My name is Shawn Hampt and I’m from Maryland. I am a beginning woodworker (novice at best). I joined to get and share info and knowledge in working with wood and learn from others. Love all my Kreg products, especially my K5!

This past weekend I decided to build myself a simple mailbox to replace the plastic piece of junk hanging on my gate, so I got to use the brand-new pair of corner clamps that were delivered just last week. They really made the job a lot easier and since I don't even have a mounted vise at the moment I can just imagine how frustrating it would've been to try and keep those sides together while glueing and screwing them in place without the clamps!

I'm not done yet, because I still have to fit the lid and front door, but I wouldn't have been nearly as far as I am now without those clamps. They're a little sensitive and finicky to adjust, but once they're at the right setting they really do a great job!


Steven here.

I live in North Alabama and have raised two teenage boys.  I have been doing woodworking and DIY projects for over 30 years.

I also, cook, play guitar and keep salt and fresh water aquariums.

I started using pocket holes in the 80s on a jig I built for a drill press and had to use two different drill bits, but it worked.  :)

Hi everyone,

I'm in the Huntsville, AL area. I do a lot of DIY remodeling of a historic home I share with my wife, four kids, three dogs and bearded dragon. I've been working quite a bit with the Kreg jig for the past 5 years, but still a newbie!

Looking forward to the community.


HSV Alabama or Texas?

Whoops!  See it now.

Me too!


Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Just Assembled Adaptive Cutting System 1 Reply

I purchased the ACS directly from Kreg 2 weeks ago. This morning I finished the assembly with the exception of installing the measuring tapes. The assembly took me about 4 hours, between reading the manual, watching videos and sipping coffee. I'm…Continue

Tags: ACS, System, Cutting, Adaptive

Started by Robert P Trower in Other Kreg® Products. Last reply by KregRep Aug 13.

Problem with automax project clamp and bench clamp 1 Reply

I cannot get either clamp to face clamp a 2" x 4". Is there a fix for this?Continue

Started by Christian Bookter in Beginners' Zone. Last reply by KregRep Aug 9.

Product Reviews

K5 Review

I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…


Posted by Gary roofner on April 5, 2019 at 10:02am

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm — 1 Comment

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service