Kreg Owners' Community

I have almost completed construction of the Shop Vacuum Cart (I have attached a link to the plans which are available on the Kreg website. Shop%20Vacuum%20Cart%20with%20Built%20In%20Storage.pdf) I am very impressed with how the cart is proceeding. I am convinced it is going to be a big asset to my shop and, at my age (69), an asset to my back.

I have decided to build a second cart to carry my air compressor. I have attached a photograph of the compressor.

I do have a question and need input. There is a relief valve on the front of the compressor. I have included a photograph which shows the location of the valve. As you can see, when opened the valve evacuates the high pressure air in the tank downward. Since I live in Corpus Christi, located on the Gulf Coast, the air always has a significant amount of moisture. This means if the compressor were sitting on the cart the relief valve, when opened, would blow high pressure air and water downward onto the plywood bottom of the cart. I am concerned that over time this would lead to degradation of the plywood.

The workaround I have come up with is to use a hole saw to cut an opening below the relief valve. Do you believe this would be an adequate workaround? If not, do you have a better idea?

Views: 339

Reply to This

Replies to This Discussion

I think your idea would work, but to keep the plywood away from moisture, how about drilling a 2" hole for the relief valve and installing a 2" PVC ring that would protect the plywood?

And an elbow to push the air back under the cart to keep from blowing floor dust in your face.

On my larger compressor, I attached a line to the drain valve to route the moisture out of the shop.  I had to change out the valve (I went to a 90° throw ball valve instead of one that I had to turn a million times to fully open) to affix the line.  You can route the line to any exit point you want, even relocate the valve to make it easier to access. 

I think your solution to the problem is that you should go for Porter-Cable CMB15 because it's portable and can be carried anywhere also it's very amazing because i have used it personally. i have also read a post where they have tell the solutions to this kind of problems related to the air compressor.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

Videos

  • Add Videos
  • View All

Forum

Back with Kreg 3 Replies

After being disappointed with my Kreg Foreman I sold it and got a Porter Cable 560. It was a decent jig and performed with decent results. Then a friend who is also a Kreg dealer told me about the K5.i bought one and set it up. I must say it's…Continue

Started by DaveTinley in Beginners' Zone. Last reply by KregCS Apr 17.

spam 3 Replies

Did anybody get bs email from Timothy White about Your surname? He said he got my name from here.Continue

Started by Timothy Spoon in Beginners' Zone. Last reply by KregRep Apr 4.

Product Reviews

K5 Review

I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…

Continue

Posted by Gary roofner on April 5, 2019 at 10:02am

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm — 1 Comment

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_