Kreg Owners' Community

At Kreg, our position has always been that glue is completely optional - which stands in stark contrast with other wood joinery techniques.  However, we also suggest that if you want the strongest joint possible, adding glue is the way to go.  The great news is that if you do use glue, there's no need for hours of clamp-ups since the screws act as mini internal clamps while the glue dries.

 

Inquiring minds want to know... when you're building your own projects with Kreg Joints:

  • Do you use glue?
  • All the time, some of the time, none of the time?
  • Are there situations where you feel glue is more needed?
  • If you don't use glue, why not?  Do you foresee disassembling your project later on?  Are there any particular issues you've had (mess, frustration, finishing inconsistency, etc.)

Views: 4048

Reply to This

Replies to This Discussion

Sometimes... especially if the piece will be heavily loaded.
Yes I use glue, but not nearly as much as I used to before I discovered Kreg.  If its a permanent type project, I'll use a little glue, but it really is a decision I make at the time.  As I've gained confidence in the holding power of the Pocket Hole Screw, I've greatly decreased my use of glue.
have made dozens of projects with pocket screws and never used glue. i know the joints would be stronger, but after making these projects and the abuse i put some of them thru, i really dont see the need for glue. in the future i want to start useing glue, will just make the joints that much stronger.
I always use glue.  dampen both pieces with a wet rag, apply glue to both pieces, even the glue with my finger,  screw it together and wipe the excess  off  with wet rag.
I use glue some of the time.  I tend to use it where I'm putting together a bench or somewhere someone may put weight on the item.  I "know" it's not needed, but it makes me feel better knowing there's just a tad bit more there holding everything together.
sometimes I will use glue in certain joints , but it's very rare
I use glue all of the time, due to the fact that old habits are hard to break and it does make a very strong joint along with the Kreg system.
I always use glue, unless it is quick throw away jig.
using glue also fills any cracks or gaps,  it is a good wood filler.

Michael Campbell said:
I always use glue.  dampen both pieces with a wet rag, apply glue to both pieces, even the glue with my finger,  screw it together and wipe the excess  off  with wet rag.

Almost always for the whole piece and always for the carcass.  The only exception (and depending on the project), I like to do pre-assembly/dryfit.  Occassionaly, i'll put together the whole piece without glue to ensure i've got everthing the way i want it, then i knock it down and do it all over again with yellow woodglue.

It all depends on whether or not I want to make a mess. See, when it comes to glue, I always make a mess. Generally though, I don't usually use glue when screwing things together.
If a project is worth doing, it is worth keeping. Glue adds to the strength imparted by the pocket screws.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Popular Posts & Projects 

1 Parts

Parts

Videos

  • Add Videos
  • View All

Forum

Parts

The Clamp anchor screw broke on my mobile project center.  How can I acquire a replacement?Continue

Started by Jon J Howard in Beginners' Zone 11 hours ago.

Rip-cut ACS plunge saw

Just got a rip-cut and installed my Bosch saw haven't used it yet but saw was a good fit. Got the original ripcut and didn't really like it had trouble cutting straight. New one has several improvements should make it work much better. especially…Continue

Started by William Burt Brown in General Woodworking Mar 17.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_