Kreg Owners' Community

I finished my daughters bookcase yesterday. It was made from 3/4" birch ply with a 3/4" pine face frame, edgebanding and moulding. I'm starting tomorrow.....any suggestions on the staining process before I begin? 

Views: 285


Reply to This

Replies to This Discussion

After sanding, you can wipe it with spirits, and you can see what the wood will look like once the (oil based) finish is on. You can also see right away if glue has seeped out on the wood.  Recently I bought some pine veneered door jambs, and when I started staining them, the manufacturer had allowed glue to seep out and be wiped on the face.  It was too thin to re-sand, and looked terrible.  Ugh!

Birch ply and pine can also be a little splotchy when stained, so it helps to use Minwax Wood Conditioner or Zinsser Seal Coat.

Nice book shelf!

Thanks Rick you've been a big help. I really appreciate this.

I've had good results with 3-4 coats, 1-2 hours in between coats . Eliminate dust with microfiber cloths from the auto section at wal-mart. Then finish with minwax poly. I like satin for some projects and gloss with others. Being patient is the hard part when waiting fr the coats to dry. I've had success too by using a heat gun carefully to hasten the process. Problem is, it will stink like fumes until things cure up fully.

Thanks Sean this sounds like good advice. I'll let you know how it comes out.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Miter saw stand

     Has anyone used one of the Kreg Universal Stand configurations as the base for a miter saw workstation with fold down wings?  I scrolled through the pics in the community and all I saw were using a DIY base cabinet.  I have an extra Kreg router…Continue

Tags: saw, Miter

Started by Bill Murphy in Other Kreg® Products Jun 6.

French cleats 101 advice please

Hi all I am kind of new to the forum. Though I have been a kreg owner for more years than I can recall. As a CSS  (Complete Set Syndrome) sufferer I have obvious;ly got one of everything kreg make ( in my price bracket). LOL.  after years of waiting…Continue

Tags: Unklejon, french, Cleats

Started by John Hoskison in General Woodworking May 27.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 5 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service