Kreg Owners' Community

Hi Folks,

I am setting up my Beaded Face Frame system and I can't figure out how to set the cursor on the router stop. The instructions do not say how to do it. What point of reference do I use?

Appreciate any help!

Thanks!

-RM

Views: 145

Reply to This

Replies to This Discussion

Ryan,

The instructions for this application are listed on page 8 of the instruction manual for the Beaded Face Frame System.  Basically you will put the 1/2" dowel pin in your router.  Then set the cursor at the 1/4" mark and slide your fence over until the stop just touches the pin.  This will calibrate the fence along with the stop.  If you have any other questions please let us know. 

My issue was how to set the cursor on the stop itself. The plastic cursor can slide in and out. I figured it out by trial and error but the instructions do not say how to adjust the lens cursor on the stop.

Thanks!

-RM

Ryan,

Since you are setting the fence based on the position of the cursor on the tape it would not matter where this was placed as long as it was not moved once calibrated.  This is the reason that it is not covered in the manual.  I'm glad to hear that you were able to get it to work and if you need any other assistance please let us know.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Wheelbarrow organization 1 Reply

Anybody have any ideas on how to make a couple wooden attachments for the side of a wheelbarrow that can hold and secure some long handle yard tools?

Started by Vincent A Cutright in Beginners' Zone. Last reply by KregRep 13 hours ago.

Constructing an island benchtop

G'day,I am a new member to the forum, although I have had the pocket jointer for a number of years, I just didn't get around to joining you.Anyhow - my wife and I are in the process of downsizing [in fact we are currently building our 3rd "Last…Continue

Started by Peter Watkins in General Woodworking Jun 19.

Product Reviews

K5 Review

I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…

Continue

Posted by Gary roofner on April 5, 2019 at 10:02am

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm — 1 Comment

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_