Kreg Owners' Community

Hi Folks,

I am setting up my Beaded Face Frame system and I can't figure out how to set the cursor on the router stop. The instructions do not say how to do it. What point of reference do I use?

Appreciate any help!



Views: 173

Reply to This

Replies to This Discussion


The instructions for this application are listed on page 8 of the instruction manual for the Beaded Face Frame System.  Basically you will put the 1/2" dowel pin in your router.  Then set the cursor at the 1/4" mark and slide your fence over until the stop just touches the pin.  This will calibrate the fence along with the stop.  If you have any other questions please let us know. 

My issue was how to set the cursor on the stop itself. The plastic cursor can slide in and out. I figured it out by trial and error but the instructions do not say how to adjust the lens cursor on the stop.




Since you are setting the fence based on the position of the cursor on the tape it would not matter where this was placed as long as it was not moved once calibrated.  This is the reason that it is not covered in the manual.  I'm glad to hear that you were able to get it to work and if you need any other assistance please let us know.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Recent Workbench Survey Legitimacy

Yesterday, I received an email wanting my opinion on Kreg adding high end workbenches to their product line and wanted to know before I clicked the link if this is a legitimate survey or some phishing scam. Here's the link I was provided (…Continue

Started by JOHN W. GOETZ in Other Kreg® Products Dec 10, 2021.

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11, 2021.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service