Kreg Owners' Community

Help - I need to raise workbench to match height of other workbench

As my first Kreg project I am building the workbench as per the project plan page. I made a mistake with the leg heights and having completed the bench save adding the worktop, the bench will be 1 cm shorter than my other bench. I could put 1cm pieces under each leg but feel all the hard work of making the bench will be undermined by the obvious leg extensions. Is there another way to raise it under the worktop so it won't show but will also enable me to secure the worktop? 

Appreciate any ideas.

Cheers.

Views: 2723

Replies are closed for this discussion.

Replies to This Discussion

I would just add extra piece to the worktop,  that way it becomes like a sacraficial worktop and you can replace it when it when gets too dinged up and your workbench will be like new again.  Trim any extra from your legs to suit the correct height your after.

I agree with AL, 1 cm (10mm) plywood should be easy enough to find. Either that or add that to the top of the frame and then install your top.

Or shim under the table top  You could add a decorative band of contrasting wood as a "planned" accent.

 

Guys,

 

Thanks for the responses, sensible approaches will head to the store this weekend and hopefully get it all finished up.

 

Gerard

You could put any size plywood on the top and then shave down the legs to make them match up too.  Might be cheaper than finding a special size plywood.

OP is from the UK so I doubt 10mm is particularly "special".

Mitch Fenneman said:

You could put any size plywood on the top and then shave down the legs to make them match up too.  Might be cheaper than finding a special size plywood.

I agree with the others,I used 1/4 masonite on mine 23 ago.Still going strong.If I mess up real bad I fill with bondo & go on.One other idea would be to just put levers on each leg.very help[full if floor were to have highs & lows. DENO

Haedwood makes A nice sacraficial top to A work bench. Cheap. Easy to replace. Tough.

Sorry about the spelling. I meant hardwood.

Didn't you really mean Hard board, ie Masonite?

just noticed my spelling.I meant adjustable height screw type levelers on the bottom of the legs asyou see on most tables.  DENO

I think DENO has the best idea.

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_