Tags:
I own several HF tools including plug in power tools. A few years back someone broke into my truck and stole all of my power tools. In these tools I had a $500 Milwaukee Hole Hog drill. I made due since until I was recently hired to to wire an entire new construction house for electrical. There was no way I was going to drill all those holes with my dewalt hand drill, and I did not have the money on hand to buy a new hole hog.... I did some research and found that HV had their own version of the hole hog for I think $129 regular price and on sale on the web site for $89. I when to the store, asked if they price match the site and they told me yes, so I bought it with a 2 year extended warranty for an additional $10. So if it fails for me any time in the next 2 years I get a no questions asked replacement.
Every time I buy a tool there that is even suspect, I get the 2+ year replacement on it.... believe it or not, I have yet to use it.
The hole saw I bought there, I used it for the entire house with a 1 1/4 inch by 18 inch long bit and a 1 1/4 inch by 8 inch.... and once I used a special 1 inch bit that had a thinner shaft made for smaller drills, and the torque this drill put out actually twisted the shaft on this bit.... LOL
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service