Hi all I am kind of new to the forum. Though I have been a kreg owner for more years than I can recall. As a CSS (Complete Set Syndrome) sufferer I have obvious;ly got one of everything kreg make ( in my price bracket). LOL. after years of waiting I am now retiring and finally getting my own workshop (YAY). I am cladding the workshop in hardwood ply 0.5 inch and looking at using French cleats for the storage system as ever these days there is simply to many posts nd YouTube on the subject yet they all seem recalcitrant to share simple details such a dimensions I am going to use 3/4 ply for the cleats I just wondered if any of you guys could suggest the width of the cleats I need to cut and the optimum spacing between them. Any shared experience welcome. Eg. Close together or further part and use spacer blocks and what distance to set them apart.. i have a 22’ x 8’ wall set aside for storage. Any advice welcome.
thanks in advance
Unklejon
Tags:
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service