It’s that time of year again! The days are getting shorter, and—in many places—cooler. When it’s time to build your next project, you’re probably headed back to the garage/shop! With colder months coming, we’ve got a FREE Kreg Workbench Project Plan to help you make the most of your workspace this garage/shop season.
Below, you should see a PDF file: Kreg 2x4 Workbench Project Plan. Simply save the PDF file to your desktop, open the file in Adobe Reader, and then print the project plan from your home computer. If you don't already have Adobe Reader installed on your computer, you can download it for free here: http://get.adobe.com/reader/.
Once you're done building, be sure to share your project for all Community members to enjoy! Happy Building!
Tags:
Thanks very much!
Simple, Sturdy, and I have just the spot for this workbench! Thanks Kreg!
Looks great and useful. I'm going to make an 8' version. Anybody see any problems with that? Of course I need a middle support.
As a beginner I will be building several of these as basic benches to work on, they appear to be around the skill level I may be able to achieve.
Thank you
This was I think the 2nd thing I built, should have been the 1st because it makes building stuff so much easier. Tip: I put wheels on mine (2 swivel locking/2 swivel stationary) so I can roll it into the middle of my garage when in use, then roll it back up against the wall when I'm done.
Also, built a smaller version to mount my chop saw to.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service