Kreg Owners' Community

Here is a cabinet I built with wings on the side for my Foreman.

Its made out of Lyptus plywood and framed in Mahogany.

I also have it attached to my dust collection system.

I still have two small drawers to build that will go under the wings.

All in all I am happy with the cabinet, the Foreman, not so much.

Thanks for viewing.

Dave

Big Kahuna Woodworks

Views: 402

Reply to This

Replies to This Discussion

I love your cabinet and I also love my Foreman.  Mind if I ask why you don't like the Foreman?

Edit;

Never mind I see your other post on the cherry wood.

Suzy-

There a lot of things I love about the Foreman. The stops on it are really handy, the speed at which you can bore 

plywood is really, really great. 

I just have the issue with the cherry lumber. I have tried all the tips in the other thread. But in the end I had to switch back to the hand held drill and the clamps. 

Which after doing about thirty rails that way I really believe the issue is the bit in the foreman. Because I have 

not had one problem with a drill mounted bit.

Thanks for noticing the cabinet.

Dave

Big kahuna Woodworks

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_