Kreg Owners' Community

Hi does anyone have the project plan for the flower box / seating bench  that came in your jigbox? I had a puppy melt-down while i was away and he ate that one and  I already bought the wood for it !!Please can anyone help me out with a copy?! Thanks Katrina with 2 bad black labs!

Views: 1559

Reply to This

Replies to This Discussion

Katrina, OH NO! Haha, I guess it makes for a good story though!
Here's the link you need to download the project plan so you can reprint it:
http://www.kregtool.com/project_plan.html

For future reference, you can always find that link in the right-hand column of this community. It's called "Download Kreg Project Plans" Good luck with your project, and post some photos if you can! Thanks for the laugh late on a Friday afternoon. ;)
Here are the plans in pdf format

Potting Bench.pdf


Also a pictue I took last winter as I was finishing up my version of the potting bench. I widened it a bit and left off the right front cross piece so I can slide a calvanized trash can under the bench top to hold potting soil. I also want to add another shelf above the existing shelf.

Dan thanks so much for your reply i am looking for the plans for a flower box and seating bench project your potting bench looks amazing and very professional i guess i will keep looking thanks again Katrina

Dan said:
Here are the plans in pdf format

Potting Bench.pdf


Also a pictue I took last winter as I was finishing up my version of the potting bench. I widened it a bit and left off the right front cross piece so I can slide a calvanized trash can under the bench top to hold potting soil. I also want to add another shelf above the existing shelf.

Thanks for your reply, but I'm looking for a plan for a flower box and seating bench .I appreciate the reply and I will keep on looking and try to control the puppies better!! Katrina

KregRep said:
Katrina, OH NO! Haha, I guess it makes for a good story though!
Here's the link you need to download the project plan so you can reprint it:
http://www.kregtool.com/project_plan.html

For future reference, you can always find that link in the right-hand column of this community. It's called "Download Kreg Project Plans" Good luck with your project, and post some photos if you can! Thanks for the laugh late on a Friday afternoon. ;)
Katrina are you looking for the one with planter's on the ends and the bench in the middle.
David , no I'm looking for the bench and seperate planter box but thank you for your reply! actually I found the right set under photos (planter&bench) but don't know if they will share the plans Hoping to get a reply from her,thanks again Katrina

David Dean said:
Katrina are you looking for the one with planter's on the ends and the bench in the middle.
I have planters on my photo page

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_