Which is the best way to apply finsihes? Brush or Spray?
I applied the stain and am working on applying my clear coat. I have been using a brush with water based polyurethane, thin coats and sanding and steel wool in between coats. This seems fine but notice some brush marks. Thought that spraying might be better but did not know if there is other problems associated with that.
Any input would be helpful.
Thanks Bill
Tags:
I totally agree with Kim C ... NEVER use steel wool with anything water based. If you don't really want to spray, have you tried one of those sponge brushes? Another option, try using wipe-on poly - it's a bit thinner. I've also used Jeffery Pike's method of using 400 grit. I've even gone so far as to use 800 grit with excellent results. I really should get a sprayer - but need so many other things first.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I have had the ACS for about a year. Was wondering if there any other blades, like a Diablo, that will fit the saw?Continue
Started by Randall H Gress in Beginners' Zone Feb 20.
I have been using the Automaxx 6" clamp for two plus years, and recently the clamp is impossible to close the handles to secure the work and my jig. I cannot close the handles no matter how much pressure I can exert. I open the clamp to max to reset…Continue
Tags: clamp, inch, 6, Automaxx
Started by Anthony M Calabrese in Other Kreg® Products Feb 12.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 4 Comments
© 2021 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service