thanks robert, i love the idea of using a black light but i looked through all the catalogs i have and cant find the tite bond you are talking about but it is a great idea guess i'll go to titebond .com and see if they can hook me up with a retailer. no matter how carefull i try to be and i tried the blue tape before i still seem to get glue somewhere. the first sight you sent me to gave me a couple of good ideas to try , thanks again
the best way to do it is to let the glue, that has squeezed out, dry. once it's completely dry, scrape it off with a chisel and then sand the area clean. Don't use a damp rag to remove glue if you're staining- it will always show.
I am having issues cutting cedar plugs, they are too loose, too short and rough. When I read the online advice and forums they suggested using a higher speed drill. I went and got a corded drill to get better speed to cut smoother plugs. I thought…Continue
Does anyone know of a company making a rail square for the Kreg ACS rail? So many companies make high quality rail squares for the other rails systems out their (Makita, Festool, Mafell, etc) but I haven't had any luck find one that is compatible…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…