thanks robert, i love the idea of using a black light but i looked through all the catalogs i have and cant find the tite bond you are talking about but it is a great idea guess i'll go to titebond .com and see if they can hook me up with a retailer. no matter how carefull i try to be and i tried the blue tape before i still seem to get glue somewhere. the first sight you sent me to gave me a couple of good ideas to try , thanks again
the best way to do it is to let the glue, that has squeezed out, dry. once it's completely dry, scrape it off with a chisel and then sand the area clean. Don't use a damp rag to remove glue if you're staining- it will always show.
Hello - I have a couple of workbenches in my 'shop' and am contemplating putting 2 or 3 pull out bins on the bottom shelves of both. I've not worked with drawer slides before and am looking to make it simple(r). Thinking of making 2 sets of pocket…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…