Edge Joining 2" Boards - Kreg Owners' Community2024-03-29T05:51:31Zhttps://kregjig.ning.com/forum/topics/edge-joining-2-boards?commentId=2900167%3AComment%3A974697&%3Bfeed=yes&%3Bxn_auth=no&feed=yes&xn_auth=noThank you, sir. Brad Martin…tag:kregjig.ning.com,2018-12-17:2900167:Comment:9757202018-12-17T18:38:34.815Zbrian lazenbyhttps://kregjig.ning.com/profile/brianlazenby
<p>Thank you, sir.<br/> <br/> <cite>Brad Martin said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/edge-joining-2-boards#2900167Comment974697"><div><div class="xg_user_generated"><p>If you have an offcut I would do a test hole so you can check you not going to go through the top.</p>
<p></p>
<p>Depending on your jig you may be able to mark the end grain to check the depth that way.</p>
</div>
</div>
</blockquote>
<p>Thank you, sir.<br/> <br/> <cite>Brad Martin said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/edge-joining-2-boards#2900167Comment974697"><div><div class="xg_user_generated"><p>If you have an offcut I would do a test hole so you can check you not going to go through the top.</p>
<p></p>
<p>Depending on your jig you may be able to mark the end grain to check the depth that way.</p>
</div>
</div>
</blockquote> Perfect, thank you. I figured…tag:kregjig.ning.com,2018-12-17:2900167:Comment:9757172018-12-17T18:38:14.962Zbrian lazenbyhttps://kregjig.ning.com/profile/brianlazenby
<p>Perfect, thank you. I figured glue 'em and screw 'em and let the glue set would be my best bet.<br></br> <br></br> <cite>michael dunn said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/edge-joining-2-boards#2900167Comment975303"><div><div class="xg_user_generated">Essentially when all is said and done it is the glued up joint that is the main event while the screws initially act as an “in place clamp” while the glue sets up. Purchase good quality glue such as titebondIII and…</div>
</div>
</blockquote>
<p>Perfect, thank you. I figured glue 'em and screw 'em and let the glue set would be my best bet.<br/> <br/> <cite>michael dunn said:</cite></p>
<blockquote cite="http://kregjig.ning.com/forum/topics/edge-joining-2-boards#2900167Comment975303"><div><div class="xg_user_generated">Essentially when all is said and done it is the glued up joint that is the main event while the screws initially act as an “in place clamp” while the glue sets up. Purchase good quality glue such as titebondIII and utilize proper clamping at the onset you should experience no problems. The pocket hole screws while certAinly do assist in connection of the end boards its the glue that does all the heavy lifting. You should be fine with the size screw you are referring too</div>
</div>
</blockquote> Essentially when all is said…tag:kregjig.ning.com,2018-12-15:2900167:Comment:9753032018-12-15T17:33:09.150Zmichael dunnhttps://kregjig.ning.com/profile/michaeldunn
Essentially when all is said and done it is the glued up joint that is the main event while the screws initially act as an “in place clamp” while the glue sets up. Purchase good quality glue such as titebondIII and utilize proper clamping at the onset you should experience no problems. The pocket hole screws while certAinly do assist in connection of the end boards its the glue that does all the heavy lifting. You should be fine with the size screw you are referring too
Essentially when all is said and done it is the glued up joint that is the main event while the screws initially act as an “in place clamp” while the glue sets up. Purchase good quality glue such as titebondIII and utilize proper clamping at the onset you should experience no problems. The pocket hole screws while certAinly do assist in connection of the end boards its the glue that does all the heavy lifting. You should be fine with the size screw you are referring too If you have an offcut I would…tag:kregjig.ning.com,2018-12-02:2900167:Comment:9746972018-12-02T03:01:47.370ZBrad Martinhttps://kregjig.ning.com/profile/BradMartin
<p>If you have an offcut I would do a test hole so you can check you not going to go through the top.</p>
<p></p>
<p>Depending on your jig you may be able to mark the end grain to check the depth that way.</p>
<p>If you have an offcut I would do a test hole so you can check you not going to go through the top.</p>
<p></p>
<p>Depending on your jig you may be able to mark the end grain to check the depth that way.</p>