There are no easy drawing programs. I've only tried a few programs, but IMHO, Sketchup is not hard to learn. There are lots of very good YouTube videos. I learned plenty from them. OR, I Suggest you buy the very excellent ebook : http://www.tauntonstore.com/woodworking/sketchup.html
It is tailored for WW. i use it exclusively now.
Trust me. If you will dedicate one day to that book, you will be drawing boxes and boards at day's end.
THEN, draw something every day for a month to burn in the learn in'.
TIP: print a hard copy of the first five chapters if you don't have another device, such as a tablet, to display the ebook.
If I sound like an evangelist, it's 'cause I am. Sketchup rocks! It's 3D and it's free!
I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue
I am building a small trunk for a military friend to put some belongings in. I have made legs out of ash hardwood and will make the sides out of 1/2” or 3/4” Baltic birch plywood. The legs are 1.5” thick by 2” wide. So since I’m drilling pockets in…Continue
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…