Tags:
I have a heated shop (wood burner) and do the greatest share of my projects in the winter. Not being a winter sports person and living in Michigan it keeps me busy. Or as my wife says "it keeps me off the streets and out of the taverns"!
I build a lot of furniture; chest of drawers, headboards, etc. and the Kreg Jig saves me time and eliminates the frustration of ill fitting and weak joints.
Garage is shop, NOT heated or cooled... in So. Calif.... small shop... table saw, band saw, DW-735 planer, old 4" jointer, router table, circ. saw, bench drill press, and sanders, clamps...
Spring and Summer and part of the Fall is the best for me... otherwise, it's too wet (rain) and cold.
I have to roll-out some of my stuff into the drive way to really be able to work...
I do most of my woodworking in the summer and fall, I work out of a 24 x 24 unheated garage that doubles to park two cars. IT gets kind of sloppy in there in the winter months due to snow dripping off the cars. someday I hope to build a small shop to work in the winter months, I AM dying to get out there and build something but still to cold up here in Northern minnesota.
Joe
I have a garage/woodshop and the van is in the garage most nights. I have an electric radiant heater that I can 'focus' at the place I'm presently working in the shop (all my power tools and worktable are on wheels). If the shop is anywhere near 50 F (10 C), I am comfortable in the shop.
In the summer, it is often too hot by noon to work in the shop. Our seasonal temperatures vary from 100F in the summer down to 15 degrees in the winter. So in an unheated/unairconditioned shop, I work when I can.
lynxsg
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service