Kreg Owners' Community

I was so excited to get my Kreg jig. I've been using it and practicing and practicing and I have just been defeated. Actually the jig is not the problem the problem is putting everything together after the pocket holes are made.

Views: 495

Reply to This

Replies to This Discussion

Hey Cheryl,

I know the feeling, but if you are having the same problem I was having..joints not staying put or even.  I have to really work with my clamps and get some new ones.  Clamping is key...and so is some glue.  I am sure your stuff isn't as bad as you think.  Keep at it, you won't turn into Norm Abrams over night.  

Hello Cheryl,
Sorry to hear that you are feel discouraged, but please don't give up! Even if your troubles aren't directly related to the Kreg Jig and/or drilling your pocket holes, the Kreg Customer Service Team would still be more than happy to help you out and offer their best advice! Please contact them directly by phone at 800-447-8638 or by email at customerservice@kregtool.com. They are here Monday through Friday, from 8am-5pm CST.
Have a great weekend!
KregRep

Cheryl;

In the video section of this page there are several helpful videos for new Kreg users, page 3 there are two from Chiefs shop. As well on the side trim carpentry  with Gary Stiegler there is a lot of helpful information on clamping etc.

Hope this info was helpful, keep trying you will get it and be amazed. Let us all know how it is going and if we can be of anymore help.

 

Jeff

Cheryl,

All joinery has a learning curve, just make some adjustments and keep trying.  Also the web and tv provide us with a parade of perfect looking projects.  There are many imperfect projects that are just fine or even great.  I would try a forgiving project, possibly an outdoor project or a utility project.  I build Norm's adirondack chair with high school students its really forgiving and pocket holes really improve the design.  Finally try pocket holes with a notch, dado or rabbet.  This traps the board and prevents movement.  

Hi Cheryl,    I would think it is a safe bet to say that every one of us has attempted a project and felt it was best suited for firewood when things do not go as hoped or planned.   What seems to be the problem?  Joints not holding?   Assembly out of square?    Great group here of both experienced craftsman as well as those just starting out like myself.  Hope you keep giving it a try.  Nothing better than the high five moments you give yourself!

get some scrap wood and practice. the key is clamping. set up a 2x4 with a clamp on your bench and run your work being screwed into right up against it, then clamp your work together with a KREG clamp. It took me a little fussing too at first, but you will figure it out.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_