Kreg Owners' Community

I recently purchased the Crown Pro jig. In the instructions it mentions to set the mitre saw table depending on if 0 or 90 is in the middle of the table. My saw has 45 in the middle. How do I figure how to set the angle?

Views: 307

Reply to This

Replies to This Discussion

I think they mean to say "when your saw is set to make a square cut to the fence, what is the pointer pointing to?"  There, the answer to the question would be either 0 or 90 degrees.  Most saws will point to 0.

Some saws made by Bosch, Craftsman and Wen (and others) have the pointer and scale offset so directly in front of the saw is the 45 degree mark.  When the saw is set to make a square cut, the pointer will point at 0 degrees.

Tim, thank you for your good advice, Kevin, if you would like any further information, please contact our Technical Support Team directly at 800-447-8638 or

I made my own jig out of some scrap wood. I apologize for the video not being the best but it will show you the basics of what you need to do.

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service