Kreg Owners' Community

Incra Jig Ultra 24" w/ templates - $175 . Is this a good price? It's available on craigslist.

Views: 128

Reply to This

Replies to This Discussion

Seems fair, they average for around $250 bones (if memory serves).  I'd offer $150 and see if they'd bite?
This is the 24" its a little more Geoff. I already offered 150 didn't take.

Hi Gary - I would figure $150 tops. New it's going for $199 from INCRA + about $20 for the templates. Used there would be no warranty nor support. Plus you really wouldn't know for sure if all the parts were there or something had been "reconfigured".

Here's a link, your money

INCra

Thanks I now consider it not a good buy. I was think close to 250 to buy new.
Might want to shop around...we've got them here in Canada for around $250...meaning you should be able to find them in the US for about 20% less.  I agree with John....(obviously) ... Any more than $150 and i'd walk away

Gary roofner said:
This is the 24" its a little more Geoff. I already offered 150 didn't take.
I have the Ultra Lite (which I got on ebay for $90) and it is one of the most well made and useful tools in my shop.  I think they are well worth the new price.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_