Kreg Owners' Community

Circular saw for cuts square enough for pocket hole joinery?

Any recommendations for a circular saw that would make cuts sufficiently square for good pocket hole joints? Preferably a saw with a dust chute/shop vac attachment. 

I was looking at the Bosch CS10, for which Bosch offers a dust attachment, but the reviews mention that the saw motor isn't mounted to the base plate, and when pushing down on the handle, there is a bit of flex that moves the blade out of square relative to the base plate, meaning the cut won't be a perfect 90* cut.

Views: 741

Reply to This

Replies to This Discussion

I use a half dozen different circular saws and have for many years.

When properly setup and using a suitable guide, they make accurate 90 degree cuts.

Feed and speed is key.

If you force the cut, it may veer off the intended cut line.

The Bosch CS10 is an excellent saw.

Perhaps the person who wrote the review, wasn't using the saw correctly.

I've experienced no flex in the handle, in the one I've used.

Most circular saws will cut 90, when properly set and using a suitable guide.

Peruse saws at your local stores---pick out what you like---

It's got to feel right to you---balance and grip--- or else you won't like it.

Take it home try it out for yourself.

Most offer 30 day return policy. It don't like it, return it and exchange for another.


BTW---one must have a firm grip on the handle and guide the saw thru its cut.

Don't force feed it---the tool do the work.

Use good blades and thicker blades for best results.

I've got the Bosch CS10 and have not experienced the flex mentioned.  I've used it to cut 3/4" plywood panels for my bench, which is assembled using my Kreg K4 and the appropriate fasteners.  The bench is as solid as can be.

BTW, even with the vacuum adapter on the CS10, you will still have sawdust flying about, just a lot less of it.  Without the vacuum hooked up, it will coat your right arm in sawdust.

Ken mentioned checking out the local stores.  That is exactly what I did to find the CS10.  It was tough finding a saw to replace my old and well-used Craftsman.  When you are checking, be sure to look at depth setting, angle settings, trigger, cord length, blade changes.  The only thing I don't like with the CS10 is that it has no on-board blade wrench storage like the old Craftsman did.

I made my own jig to do cross cuts.  Since I don't have room for a table saw, I've used this jig to make perfect 90degree cuts.

I think it would be pretty hard to do consistently.  Maybe if you bought a track saw?  but those are pricey as well.  I ended up buying a cheap kobalt table saw.  It works decent, but the fence is not that good.  It does do good enough though for the projects i have been working on.  Pretty much get what I paid for out of it.  In a perfect world I'd have the space and money to have a really nice 1200 dollar tablesaw, but this isn't a perfect world.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone Jul 22.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_