Kreg Owners' Community

Anyone interested in the chest plans feel free to contact me. I have a local place I get my lumber from that's very reasonable so the prices may fluctuate based on that, but it takes roughly 16 board feet to make minus the top. If a solid top it takes roughly 20 board feet. The ones I made out of oak I used a 3/4 in ply topped wrapped in solid oak banding that worked out with a 3/8 roundover. You can use rail and stiles for the panels or for flat panels I use 1/4 in. ply and a slotting bit on my router. The chest measures 22x42x18. A chest out of oak generally runs about $150 and cherry $175, I have made 3 this year, one as a hope chest for my 18 year old daughter and 2 for friends for their wives for Christmas. Rockler has brass plates that I have put on them with the names and Christmas 2009. Here's a material list to start:
16 to 20 bd ft lumber
2 boxes of tongue and groove cedar lining (takes almost the whole 30 sq ft.)
1 30 in. piano hinge
1 lid support
2 2x4 1/4 in. oak ply (if cherry, i used rockler for cherry veneer packs $15)
1 2x4 3/8 in MDF (for bottom)
KREG JIG and screws!!!

Views: 4710

Attachments:

Reply to This

Replies to This Discussion

Great looking chest Jason.  I made one too - one with raised panels.  I do not want to hijack your thread so I will start another with a pic of mine.  It was a free plan from Lowes!

 

Again - job well done - be proud!!!!

Great project, i would love to see the plans too if possible.  progman66@yahoo.com

I just done a toy chest for a grandson, and now wanna ake a sorta of foot chest to sit at the foot of my bed. I would like to see the plans for the chest you are talking about. I didnt see the pic, kinda new to this site, so maybe I am not looking in the right place. My email address is   tedkreeger@bellsouth.net

Thanks

Attachments:

I would like a set of plans.  This is a very nice chest I would like to build for my daughter.  Thanks

Gary

Nice job!!  I like the style, and if it's easy, that's right up my alley.  Would you mind sending me the plans?  Thanks.  zybzyb44@msn.com
Can you resend to jaidubb @ gmail.com?

Justin can you send me a copy at ralphsarc@gmail.com?

I've been looking for the "right" plans for a while.  Can you send them to me please? jeff@napadow.com

Thank you

I would also like a copy of your plans. kkhamil23@hotmail.com
I would also like a copy of your plans. grantlairdjr@gmail.com
I hope it isn't too late but can I get in on a copy of the chest plans? great job and the finished chest lokks first class. . .  doraldk@gmail.com

Nice job! Please forward plans!  Thanks!

al.neumann.227@gmail.com

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone Jul 22.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_