Kreg Owners' Community

Has anyone used this and the Kreg Desk system?   If so what are your thoughts

Views: 2522

Reply to This

Replies to This Discussion

I saw that exact jig system used in a recent episode of "This Old House", although they had the name covered up and never said the brand, probably because they weren't a sponsor. Looks really neat.

It basically is an improvement to Kreg deck jig system elimanating the drilling by clamping jig to the borard just need the spacers. It would be faster not drilling pilot holes. Screws are similar to kregs. However the drilling would set the shoulder better . I cant see you putting the boards down like they were just starting at one and moving across you would need spacers like kreg system. I put down a kreg deck worked well with trex decking.

I found you had set about 3 floor joist in the middle first also before you start test fit sometimes you had to reverse the boards inorder to get good joints. Contrary to popular beliefs the composit decking is not perfectly straight either. The good thing about the composit its flexable and you could take bow out by going back to the ends and setting your ends and work back to the middle.

The main thing i liked or that i read up about this is it has a built in spacer which is nice, but i have not seen these in person to really see how much i like it or not...

If boards were perfectly straight you would not need spacers but there not.  I'm sceptical of that claim. If they were straight all you would have to do is set the 2 ends and just go down the board and finish the setup

Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service