Tags:
I have the 18ga oil-less nailer.... I honestly I didnt like it when I bought it, but the place I bought it would not allow me to return it after I used it one day.... I have since been forced to use it for the past two years and I have taken a liking to it.
But there is a hitch to this... I bought it because a buddy has one of the same and he talked me into getting mine. Well, shortly after I bought mine, he wanted to borrow mine because his stopped working. His was less than a year old, so i took it upon myself to get in touch with the manufacturer to see about getting it repaired. after I described the issue, I was promptly told that it would not be covered. something about the air tank in the head that forced the nailer to work.... I told them that the gun was less than a year old and had only been used maybe 3 hours in total. the tech/rep that I was talking to said she was sorry, asked for my address and sent out a free repair kit. she said that the lack of frequent use possibly allowed the seals to dry out an caused the problem. I got the rebuild kit, and it had great step by step directions and I was able to repair the nailer.... but the kit did not have enough grease in it so it still leaked after I put it back together, so i had to pull it apart and re grease it. that did the trick.... no leaking and hasnt given him any trouble after that. I havent had any problem with mine, and I just used it the other day.guy building his must have been listening to the game....
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service