Kreg Owners' Community

Good day everyone; my name is Bruno from San Diego, CA. Building dog holes on a bench top; looking for info specific on proper set up, hole distance, etc., with Kreg's bench dogs, inline clamps, and Bench Clamp With Bench Clamp Base. Thanks!

Views: 1731

Reply to This

Replies to This Discussion

Take a look on youtube for MFT table, I believe bench dogs are made at 20mm (festool) and 3/4" for Kreg.  

Bruno .. The German benchdog holes (Festool MFT) are 20mm and spaced 96 mm on center.  The Kreg workbench holes are 3/4" holes and spaced 100 mm on center  ... so it depends what size bench dogs you want to use.  Hope this helps.  

Thank you all for your responses; oftentimes, as this one time, I tend to overthink my project, and do more work than needed. Project completed!

Looks good!!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Constructing an island benchtop

G'day,I am a new member to the forum, although I have had the pocket jointer for a number of years, I just didn't get around to joining you.Anyhow - my wife and I are in the process of downsizing [in fact we are currently building our 3rd "Last…Continue

Started by Peter Watkins in General Woodworking yesterday.

New to K5 and pocket holes, any video’s on the materials listed below?

I am using Danny Proulx book on shop workstations. I am deciding whether to use MDF or Melamine. He calls for MDF. However; I like the looks of the melamine.  I am a little leery of using pocket holes for it. One of the main reasons is I have no…Continue

Started by Michael Lusk in Beginners' Zone May 24.

Product Reviews

K5 Review

I really like the k5 it is faster to change from different size of screws. I hesitated to update because of some of the reviews about the dust collection hook up. That to me one of the improvements it works perfect no dust to cleanup .…

Continue

Posted by Gary roofner on April 5, 2019 at 10:02am

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm — 1 Comment

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_