Kreg Owners' Community

Good day everyone; my name is Bruno from San Diego, CA. Building dog holes on a bench top; looking for info specific on proper set up, hole distance, etc., with Kreg's bench dogs, inline clamps, and Bench Clamp With Bench Clamp Base. Thanks!

Views: 2396

Reply to This

Replies to This Discussion

Take a look on youtube for MFT table, I believe bench dogs are made at 20mm (festool) and 3/4" for Kreg.  

Bruno .. The German benchdog holes (Festool MFT) are 20mm and spaced 96 mm on center.  The Kreg workbench holes are 3/4" holes and spaced 100 mm on center  ... so it depends what size bench dogs you want to use.  Hope this helps.  

Thank you all for your responses; oftentimes, as this one time, I tend to overthink my project, and do more work than needed. Project completed!

Looks good!!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_