Kreg Owners' Community

For my 4th project I made a bed from my daughter out of 2x6's for the legs and side rails. Does anyone know where I can purchase 4 bed rail brackets or is there a better idea of putting these rails to the legs together?

Views: 2217


Reply to This

Replies to This Discussion

Go to your closest thrift shop and buy some old bed rails and take the brackets off of them...throw the rest away (or cut it up and use it in a project).  You'll save some money and help the local community.
I used the rockler non mortise bed rail hangers from Rockler and they are the best.
Thanks for the suggestions. I went and ordered the Surface Mounted Keyhole Bed Rail Brackets from Rockler. I will let ya'll know how these work. Johnny> awesome idea. Wish I would have thought about this first
It might be too late, John, but I 'kregged' a bed recently- 4 screws per rail and leg joint and it's pretty strong...

Looks like you have enough suggestions on your bed fastening problem. One more to add. . . try Lee Valley for this too. Ask for a catalogue and keep it on file.


By the way, nice frame! Great job.


Reply to Discussion


Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 


  • Add Videos
  • View All


Pantry slides for heavy application

  Recently purchased two 96" tall pantry cabinets that are 23" deep that only came with two adjustable shelves and two fixed, (one at about 55" and one at the very bottom).  Shelf holes in the walls are drilled 2" O.C.  Like most store-bought…Continue

Tags: drawer, slides, pantry, pull-out, 75-Lb

Started by Paul Coon in General Woodworking Aug 11.

Miter Saw Recommendation 1 Reply

I’m looking to upgrade my miter saw. I’m willing to invest a good amount of money to get one with the precision pocket hole joinery requires. Would anyone like to offer a recommended model?

Started by Joe Racz in Beginners' Zone. Last reply by Scott Davison Oct 6.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…


Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…


Posted by Robert Ringel on September 17, 2020 at 1:48pm — 8 Comments

© 2021   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service