Kreg Owners' Community

Is there a trick to using these clamps,  I've used them before with mixed results, last night i could not lock both of the automaxx, the long necked and the pocket hole.

Does it need lubricant, I'm weary of putting lubricant in them for fear that it would leak on the material.

Views: 301

Reply to This

Replies to This Discussion

Yes there is most definitely a trick to using these clamps. Undo the clamping pressure , in other words go into the negative.
They are so tight when they are made you have to "Break them In" adding lubricant will just make a mess. I used automotive brake cleaner to clean mine . There was milling residue that came out of mine.

Start to adjust the clamping pressure a little at a time until you start to feel it clamp. The more you use them the better the clamp will get.

Also the clamp pad needs to be flat on the material being clamped or the automaxx will engage to soon at that point. You may have to clamp and unclamp a couple of times to get the the clamp to adjust its self to where it need to be to clamp.
Once I figured out how to work them thay are a handy clamp to use. I now have 5 track clamps, 4 corner clamps, and 4 face frame clamps.

Thank you for the information, which is very useful to me.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

First time I really had a need for the ACS miter guide.

I've been using my Adaptive Cutting System table for a few years now, and it's been really solid. This past week was the first time I ever needed to use the miter guide though.I was rebuilding some shelving in a tiny closet and I discovered the…Continue

Tags: ACS

Started by Adam in General Woodworking May 6.

What thread and size screw to use 2 Replies

I am building a small trunk for a military friend to put some belongings in. I have made legs out of ash hardwood and will make the sides out of 1/2” or 3/4” Baltic birch plywood. The legs are 1.5” thick by 2” wide. So since I’m drilling pockets in…Continue

Started by Mike Bohannon in Beginners' Zone. Last reply by Jay Boutwell Apr 19.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2022   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_