Attaching Kreg band saw fence

[joel adler]

I have a 35 year old Delta 14" band saw. It has two holes in the left edge of its table but they are NOT threaded. Will the Kreg band saw fence attach properly to these unthreaded holes?

 

Thanks.  Joel

[Daniel C Webster]

You can thread the holes in your bandsaw table or use bolts and nuts of the proper size to fasten the fence to the table.

[joel adler]

Thanks Daniel. Are you saying that the fence does not come with attachment hardware? I couldn't tell from their marketing materials.

[Daniel C Webster]

I think it does come with attaching hardware. I have a 14 inch Delta bandsaw and the table bolt holes are tapped. I eant in my initial reply that if your table bolt holes were not tapped you could fasten the Kreg fence with stand bolts and nuts or tap the holes with threads that match the hardware that comes with the Kreg fence. I do not have the Kreg fence. I built one of wood and use C clamps to hold it in place.

joel adler said:

Thanks Daniel. Are you saying that the fence does not come with attachment hardware? I couldn't tell from their marketing materials.